940 SMT 

Single telescopic leaf (1+1) max weight 110 + 110 Kg

Two telescopic leaves (2+2) max weight 60+60+60+60 Kg

·         Electro mechanical automated system for single and double telescopic sliding doors with a fastening compartment of up to 3000 mm

·       Leaf carrying capacity:

-       For 940 SM sliding operator max 140 Kg for single leaf and 110 Kg for double leaf

-       For 940 SMT telescopic sliding operator max 110+110 Kg. for double leaf and 60+60+60+60 for four leaves

·         Support profile in extruded aluminium

·         Dimensions (height x depth):

-      SM = 180x179 mm

-      SMT = 205X251 mm

·         Sliding Guide in low noise anti wear plastic

·         Front housing in natural or anodized aluminium, hinge seat on the support profile, laid on anti-vibration rubber pads. Locked at opening by an appendix,

·         Safety cables to avoid the housing from falling (“parachute“)

·         Housing lower profile can be adapted to different thickness of the leaf

·         24 Vdc gearmotor with optical encoder

·         24 Vdc gearmotor

·         940 SDM microprocessor control unit

·       Power supply unit, with low energy consumption toroidal transformer

·       Transmission pulley with screw device to adjust the belt

·         Electro-conductive transmission belt

·         Two wheel carriages on bearing with galvanised steel structure

·         Counter-thrust roller in nylon on bearing

·         Height adjustment± 10 mm

·         Side adjustments ± 15 mm

·         Leaf fitting profile in extruded aluminium

·         Automatic adjustment of open and closed position

·         Measurement of leaf masses and friction

·         Selection of optimal speed , acceleration and deceleration

·         Photocell test

·         Anti-crushing safety device at 150 N

·         SD KEEPER OR SDK LIGHT keyboard with pushbuttons to select the operating programs and LEDs to display diagnostics

 Available programs:

-       AUTOMATIC-MANUAL-NIGHT-OPEN-ONE WAY- PARTIAL OPENING

-       By a combination of flashing LEDs you can trace the cause of door alarm

-       Reset functions

-       You can disable operation by means of a jumper and a combination of keys

-       The SD KEEPER keyboard is designed to receive the Programming Display

Programming display main functions

·         You can input access password

·         Adjustment of opening/closing speed from 20 to 180 cm/s

·         Adjustment of pause times from 0 to 30 s

·         Timer function with buffer battery (5 years range)

·         PROGRAMMING DOOR OPERATION FOR 5 DAILY AND WEEKLY TIME BANDS

·         Interlock management with or without impulse memory

·         Anti-intrusion function management

·         Logics selection on battery operation

·         Configuration of 3 outputs on the 940 SDM control unit

·         Configuration of 2 emergency inputs on the 940 SDM control unit

·         Diagnostics display

·         Display of number of cycles performed